Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTrusted Custom & Geometric Windows for Spring Valley Homeowners
Spring Valley has a housing mix that keeps window crews on their toes: mid-century ranches off Decatur with true arches over the entry, 1990s two-stories in the south neighborhoods with big trapezoid transoms above the foyer, and newer custom builds out toward Rhodes Ranch where a whole wall of glass is the point of the room. Off-the-shelf window sizes simply don’t fit those openings, and forcing a stock unit into a shaped hole is how you get leaks, cracked glass, and a room that never looks finished. Our technicians have up to 15 years of experience measuring and fitting custom units, and we’re authorized installers for CWS and ECO Window Systems, among others. Because Spring Valley summers push 110 degrees and the valley’s spring winds throw grit at every west-facing window, we spec glass and frames for this climate specifically. Calls are answered by a live person 24 hours a day. Call (888) 282-3902 for a free estimate.

What Our Custom & Geometric Windows Service Includes
Custom Impact Windows
Custom impact windows are built to your exact opening dimensions and glazed with laminated glass that holds together under a flying-object strike. In Spring Valley this matters for more than storm protection: the valley gets dust-storm-driven debris and the occasional microburst, and an impact-rated unit under a rebuilt frame protects the wall assembly as well as the room. We measure the rough opening, confirm the sill and header condition, and order a unit cut to the exact size rather than padding a stock window with trim. Every custom impact window we install is sized, sealed, and flashed to the opening it was built for, and we pull the permits so the inspection passes the first time. If your existing frames have settled or bowed, we’ll tell you before we order anything.
Geometric & Shaped Windows
Geometric windows are the non-rectangular units: trapezoids, triangles, octagons, half-rounds, and the eyebrow shapes that show up over Spring Valley entry doors and staircase landings. You need one when a stock rectangle leaves awkward gaps at the corners, or when a room’s architecture calls for a shape that carries the design. We build the order around a template of your actual opening, working with brands like CWS to get the angles right, then set the unit with the flashing detail that shaped openings demand. This is the work where measuring skill shows: a half-inch error in a triangle shows up by the end of the install. The result reads as a deliberate architectural detail, not a patch.
Arched & Curved Windows
Arched windows sit at the top of a tall wall or over a foyer, and curved units wrap around a rounded room. They come into play when a home’s design has a radius worth honoring and you don’t want a squared-off compromise filling it. Our team handles the radius measurements, confirms the head and jamb can carry the curve, and orders a unit matched to the arc rather than one bent on site. Arches are heavy and they leak in the same spot every time when the flashing is rushed, so we treat the weather barrier as carefully as the glass. If your current arch fogs between the panes or drips at the sill, that’s usually the frame, not the window, and we’ll diagnose it before recommending a replacement.
Oversized Openings
Oversized openings mean a picture window that runs most of a wall, a multi-panel slider, or a two-story window wall in a Spring Valley great room. They’re the right call when you want light and a view and you’d rather not break the opening into a grid of small panes. Big glass means big loads, so we check the header, verify the framing can take the weight, and spec laminated glass rated for the wind pressure on that elevation. We also handle the transport and set logistics, since a 10-foot unit doesn’t fit through a side gate. Done right, an oversized opening is the feature of the house; done carelessly, it’s the source of a corner leak nobody can find.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Brands We Service for Custom & Geometric Windows
We install and service custom and geometric units from CWS, ES Windows, ECO Window Systems, and Mr-Glass, and our crews know each line’s quirks. CWS has a strong custom-shape catalog, and we know where their arched frames want extra shim attention on a two-story foyer. ES Windows builds laminated impact glass, and our technicians have learned to check the edge seal on every unit before it goes into a rough opening. ECO Window Systems units hold up well in this heat, and we pay attention to how their frames expand and contract through a Spring Valley summer when we set the perimeter seal.
Mr-Glass is where we go for cut-to-fit and replacement glass work in odd shapes, and we’re careful to match the existing frame and tint so a repaired unit doesn’t read as the odd one out. Whether you have CWS, ES Windows, ECO Window Systems, Mr-Glass, or any other make, we can help. If you’re not sure what’s in the wall now, we’ll identify it during the free estimate and tell you your options in plain terms.
Signs You Need Custom & Geometric Windows Right Now
- Condensation or fog between the panes. Sealed-glass fogging means the unit’s seal has failed, and the insulating performance is gone. A shaped window with a bad seal can’t be reglazed cheaply, so it’s worth pricing a full replacement early.
- Water stains or soft trim at the sill of an arch or angled window. Shaped openings are the usual suspects for hidden leaks because the flashing path is more complex. Catching a stain now beats finding rot in the header later.
- Drafts that persist after you caulk. If you’ve sealed it twice and still feel air, the frame may have bowed out of the opening. A custom-size unit fixes a fit problem that caulk can’t.
- Metal-to-glass contact or a chip at the edge of the pane. Laminated impact glass with an edge chip loses strength fast, and in a geometric unit the stress points concentrate at the corners. This is a call-sooner-than-later item.
- You’re planning a remodel and the opening doesn’t match a stock size. A design change that adds an arch, a triangle, or a picture wall means the window order has to happen early. Getting us out during the planning stage keeps the schedule off the critical path.
Our Custom & Geometric Windows Process – Step by Step
- 1
Free in-home measure and consultation. We come to the house, take a template or precise measurement of the opening, check the sill, header, and framing, and talk through glass options. You get a written line-item estimate with the price locked in, and no change orders later.
- 2
Product selection and order. We match the window to your home’s design and the elevation’s wind exposure, then place the order with the manufacturer. We handle the permit paperwork where the work requires it.
- 3
Removal and rough-opening prep. On install day we protect the room, remove the old unit, and inspect the opening. Any rot or framing weakness gets addressed now, not covered over, and we’ll show you what we found before we proceed.
- 4
Install, flash, and seal. We set the unit level and plumb, shim it properly, and build the weather barrier in the correct order so water sheds away from the wall. Every seam and perimeter gets sealed with the right material for the frame type.
- 5
Final check and walkthrough. We open, close, and check every operating sash, confirm the seal, and walk you through the work. Any inspection gets scheduled and passed before we’re done, and the 36500-Day Done Right Promise stands behind the job.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom & Geometric Windows Cost in Spring Valley?
A shaped or oversized window carries a bigger price tag than a stock rectangle because it’s built to order. Going rates in the Spring Valley market for a single custom window, installed, sit in these ranges:
- Custom impact window, standard rectangular opening: $700 – $1,400 per unit, depending on size and glass rating.
- Geometric or shaped window: $900 – $1,800 per unit, with angles and multi-sided frames at the top of the range.
- Arched or curved window: $1,200 – $2,400 per unit, since radius work costs more to build and set.
- Oversized picture or window wall: $1,800 – $4,500 per unit, driven by glass size, the number of panels, and header reinforcement if the framing needs it.
- Whole-house custom package: often quoted per window with a discount on volume, so ask about it.
What moves the number: size, shape complexity, laminated vs. standard glass, frame material (aluminum vs. vinyl vs. wood-clad), and whether the opening needs framing repair or header work. A unit on a second-story foyer with no easy access also adds labor. How to avoid overpaying: get everything in a written line-item quote, ask whether the price includes permit and inspection costs, and don’t accept a vague per-window number with no glass spec attached. Our free estimate includes the measure, the glass specs, and a locked price with the permit and inspection costs spelled out, so you can compare apples to apples. Free second opinions on written estimates are always available.

Custom & Geometric Windows Near Spring Valley – Our Service Area
Our custom and geometric window work covers Spring Valley and the neighborhoods around it: Summerlin, Enterprise, Paradise, Winchester, Las Vegas, and Whitney to the east, plus Sunrise Manor and North Las Vegas further out. Henderson and Boulder City are also on the map, and we reach Sandy Valley for custom projects with some lead time on scheduling. Across the valley, response timing varies by distance and job size, so call and we’ll give you a realistic scheduling window. For shaped and custom window projects in Summerlin, see our custom and geometric windows page for Summerlin, and for Enterprise work, visit the custom and geometric windows page for Enterprise.
Serving Spring Valley, NV – Our Local Coverage Area
We serve Spring Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Custom & Geometric Windows in Spring Valley
Custom windows are built to the exact size and shape of an opening, and geometric windows are the non-rectangular ones: arches, trapezoids, triangles, octagons, and circles. You need them when your home’s architecture calls for a shape that stock units can’t fill without awkward gaps and trim. Winslow measures and templates the opening, then orders a unit to match. Call (888) 282-3902 with your rough measurements and we’ll talk through the options.
Order and lead time is the longest part, typically several weeks depending on the manufacturer and how complex the shape is, with install itself usually a day or two for a handful of units. A whole-house package or a large window wall takes longer, and any framing repair adds time. We’ll give you a realistic schedule in the written estimate. Call (888) 282-3902 to get the clock started.
Expect roughly $700 – $1,400 for a custom impact unit, $900 – $1,800 for a geometric shape, $1,200 – $2,400 for an arch or curve, and $1,800 – $4,500 for an oversized wall, all installed. Size, glass type, frame material, and framing repair drive the number. Call (888) 282-3902 for an exact quote, and estimates are free.
Yes, we install and service custom and geometric units from CWS and ES Windows, and from ECO Window Systems and Mr-Glass. Our technicians know where these frames want extra shim attention and how their seals hold up in Spring Valley heat. Whether you have one of these makes or another, we can help. Call (888) 282-3902 and describe what’s in the wall.
Yes, a live person answers every call 24 hours a day, 7 days a week, so you won’t hit voicemail or a call center. Most custom window work is planned, not emergency, but a broken arch or a storm-damaged picture window needs an answer when it happens, and we’ll give you one. Call (888) 282-3902 at any hour.
Every job is backed by the 36500-Day Done Right Promise, which means if it isn’t done right, we make it right, and that commitment doesn’t have an expiration date. The window manufacturer’s own warranty on glass and frame runs alongside ours. We’ll explain both in writing before you sign anything. Call (888) 282-3902 with warranty questions.
Clear the area around the window and move furniture and wall hangings a few feet back so the crew has a clean work zone. If the window is on a second story or above a foyer, we’ll handle the access logistics and let you know what we need. Have your questions ready for the estimate visit, and call (888) 282-3902 if anything changes before install day.
Schedule Your Custom & Geometric Windows Service in Spring Valley Today
If your Spring Valley home has an opening that stock windows just don’t fit, or an arch or picture wall that deserves a unit built for it, call Winslow Windows & Doors at (888) 282-3902. A live person answers any hour, the estimate is free and written line-item, and the price is locked with no surprise change orders. From our home base in Spring Valley to the surrounding valley neighborhoods, we’re the one down the road. Call (888) 282-3902 and let’s measure it right.
Written by the team at Winslow Windows & Doors.